LASER PROCESSING
SOLUTIONS BY INDUSTRY
From sheet metal fabricators in Dubai to automotive parts suppliers in Riyadh, Daqing Intelligent engineers laser welding, cutting, and marking systems around your specific production challenges -- backed by verified technical data and 10+ years of manufacturing expertise.
SHEET METAL FABRICATION
Laser Cutting · Laser Marking
Production Challenge
Plasma and mechanical cutting leave rough edges and dimensional inconsistencies on carbon steel and aluminum sheet. Downstream rework consumes 15-25% of production time. Part traceability for export compliance is manual and error-prone.
Daqing's robot laser cutting workstations deliver ±0.05mm positioning accuracy on carbon steel, aluminum alloy, and composite sheet -- eliminating secondary finishing on structural components, panels, and architectural metalwork. Paired with MOPA fiber laser marking machines (minimum line width 0.015mm), every cut part receives a permanent, scannable serial code for export documentation and quality traceability.
DOORS, WINDOWS
& RAILINGS
Handheld Laser Welding · Automatic Welding
Production Challenge
MIG and TIG welding on stainless steel door frames and aluminum window profiles causes heat distortion, visible weld beads, and surface discoloration -- requiring extensive grinding and polishing. For export to the UAE construction market, surface finish quality directly affects contract acceptance.
Daqing's handheld continuous laser welding machines (100W-3,000W) produce clean, distortion-free weld seams on stainless steel doors, aluminum window frames, and decorative railings -- no grinding required. For higher-volume production lines, the 5-axis CNC automatic laser welding system handles complex joint geometries with consistent penetration depth (up to 5.5mm in steel) and power stability of ≤±1% across 7×24h operation.
KITCHEN EQUIPMENT
& CABINETS
Automatic Laser Welding · Galvo Welding
Production Challenge
Kitchen cabinet and commercial equipment manufacturers supplying the UAE hospitality and construction sectors face strict surface finish requirements. Traditional arc welding on stainless steel sinks, oven frames, and cabinet panels leaves visible heat-affected zones and requires costly post-weld polishing -- slowing throughput and increasing per-unit cost.
Daqing's automatic galvo laser welding system produces mirror-finish weld seams on stainless steel kitchen equipment -- no grinding, no discoloration. The galvo welding head achieves a weld seam width of up to 2mm with >99.9% linearity, enabling high-speed production of cabinet panels, range hood housings, and commercial cookware frames. The QCW handheld laser welder handles thin sheet work at 200% the speed of conventional wire welding.
AUTOMOTIVE PARTS
Robot Laser Welding · Robot Laser Cutting
Production Challenge
Automotive parts suppliers -- particularly those producing flywheel assemblies, clutch components, and gearbox housings for OEM programs -- require zero-defect weld seams, consistent penetration depth across high production volumes, and full process traceability. Manual welding introduces human variability that fails statistical quality control requirements.
Daqing's robot laser welding workstations (DQ-PTF series, 1,500W-3,000W) are engineered for automotive flywheel assemblies, gear components, and structural brackets -- delivering 5× the throughput of conventional welding with multi-sensor monitoring and full temperature control. For complex 3D cutting of curved panels, pipe profiles, and structural components, the robot laser cutting workstation achieves ±0.05mm positioning accuracy with a minimum focus spot below 0.1mm.
NEW ENERGY /
LITHIUM BATTERY
BUSBAR Laser Welding · Laser Marking Traceability
Production Challenge
Battery BUSBAR welding demands ultra-precise energy control on 2mm aluminum conductors -- excessive heat causes deformation and electrical resistance failure. Simultaneously, EV battery manufacturers must implement cell-level traceability with permanent, scannable codes that survive the battery lifecycle and meet IEC and UL compliance documentation requirements.
Daqing's automatic galvo welding system is specifically validated for battery BUSBAR applications -- welding 2mm aluminum conductors with >99.9% galvo linearity and ≤±2% energy fluctuation, ensuring consistent electrical contact and zero deformation. The MOPA fiber laser marking machine (20W-50W) applies permanent QR codes and serial numbers at minimum line width 0.015mm directly onto cell casings and module housings, enabling full traceability from production to end-of-life recycling.
MEDICAL DEVICES
MOPA Fiber Laser Marking · Precision Laser Welding
Production Challenge
Medical device manufacturers exporting to the UAE and GCC markets must comply with UDI (Unique Device Identification) marking regulations -- requiring permanent, high-resolution codes on surgical instruments, implants, and diagnostic equipment housings that remain legible after sterilization cycles. Precision welding on thin titanium and stainless steel components demands sub-millimeter heat control to prevent metallurgical damage.
Daqing's MOPA fiber laser marking machines (20W-50W, 1064nm) produce permanent UDI-compliant DataMatrix codes and serial numbers at minimum line width 0.015mm with ±0.03mm repeat accuracy -- validated for stainless steel, titanium, and anodized aluminum surfaces without surface corrosion or contamination. For precision welding of sensor housings, pressure vessel components, and implant assemblies, the 5-axis CNC automatic laser welding system delivers consistent penetration depth with ≤±2% energy fluctuation.
HARDWARE &
HOME APPLIANCES
High-Volume Laser Marking · Handheld Laser Welding
Production Challenge
Hardware manufacturers and home appliance OEMs producing for the GCC retail market face dual pressures: high-volume brand marking and serial coding across mixed product SKUs, and welding of enclosures, brackets, and structural frames that must meet cosmetic quality standards for consumer-facing products. Ink printing and pad printing on metal surfaces degrade under UV exposure and cleaning chemicals common in the region's climate.
Daqing's KKVS4.0 vision-guided laser marking system enables 24/7 unattended batch marking of hardware components at any orientation on a moving conveyor -- eliminating manual positioning for high-mix production. With a laser lifespan of 100,000 hours and a marking speed of up to 7,000mm/s, the system handles brand logos, CE marks, serial numbers, and barcodes across metal, plastic, and anodized surfaces. For appliance frame and bracket welding, the handheld laser welder delivers clean, low-spatter joints without the rework cost of MIG welding.
BUILT FOR MIDDLE EAST
INDUSTRIAL GROWTH
Saudi Vision 2030's manufacturing investment program and the UAE's advanced manufacturing agenda are driving rapid expansion in sheet metal fabrication, construction metalwork, new energy, and automotive components across the region. Daqing Intelligent supplies CE-compliant laser equipment with full technical documentation, on-site installation and training, and remote technical support -- ensuring reliable production continuity for factories in Dubai, Sharjah, Riyadh, Jeddah, and Yanbu Industrial City.
Standard equipment lead time of 15-30 days, with sample testing available in 3-7 days before purchase commitment.
- Dubai
- Sharjah
- Ajman
- Abu Dhabi
- Riyadh
- Jeddah
- Dammam
- Yanbu Industrial City
MATCH YOUR INDUSTRY
TO THE RIGHT EQUIPMENT
| Industry | Laser Marking | Laser Welding | Robot Welding | Robot Cutting |
|---|---|---|---|---|
| Sheet Metal Fabrication | ✓ | -- | -- | ✓ |
| Doors, Windows & Railings | -- | ✓ | -- | -- |
| Kitchen Equipment & Cabinets | -- | ✓ | -- | -- |
| Automotive Parts | -- | -- | ✓ | ✓ |
| New Energy / Lithium Battery | ✓ | ✓ | -- | -- |
| Medical Devices | ✓ | ✓ | -- | -- |
| Hardware & Home Appliances | ✓ | ✓ | -- | -- |
READY TO SOLVE YOUR
PRODUCTION CHALLENGE?
Tell us your industry, material, and production volume -- Daqing's engineering team will recommend the right laser equipment configuration, provide verified technical specifications, and arrange a sample test on your actual production material within 3-7 days.
Sample Testing: 3-7 Days
Test on your actual material before committing to purchase. Weld penetration, cut quality, and marking resolution documented and delivered.
Technical Datasheet & CE Documentation
Full parameter sheets, compliance certificates, and installation manuals provided with every order. Supports import documentation for UAE and KSA customs.
On-site Installation & Training
Daqing engineers provide on-site commissioning, operator training, and process parameter setup at your facility. Remote technical support ongoing.
WhatsApp Direct
+86 138 2370 9557 · Fastest response
Email Our Sales Team
sales@daqinglaser.com
Request a Formal Quote
Specify your industry, materials, and production volume
Changbao West Road, Ronggui, Shunde District,
Foshan, Guangdong, China
daqinglaser.com